ADT® Authorized Dealer Serving The Entire Dallas-Fort Worth Metroplex
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Dallas Property

Residents must protect against numerous risks like burglary, flooding, and fire. But what about a danger that can’t be discerned by human senses? Carbon monoxide is different from other dangers because you might never know it’s there. Nevertheless, implementing CO detectors can easily shield you and your household. Explore more about this potentially lethal gas and where to place carbon monoxide detectors in your Dallas property.

What Is Carbon Monoxide?

Called the silent killer due to its absence of color, taste, or odor, carbon monoxide is a commonly found gas produced by incomplete fuel combustion. Any appliance that uses fuels like an oven or fireplace may produce carbon monoxide. While you normally won’t have problems, issues can present when appliances are not regularly inspected or properly vented. These mistakes may result in an accumulation of this dangerous gas in your residence. Generators and heating appliances are commonly to blame for CO poisoning.

When in contact with lower levels of CO, you could suffer from dizziness, headaches, fatigue nausea, or vomiting. Prolonged exposure to elevated levels could lead to cardiorespiratory arrest, coma, and death.

Suggestions On Where To Place Dallas Carbon Monoxide Detectors

If your home is without a carbon monoxide detector, buy one now. Ideally, you should install one on each floor, including basements. Explore these recommendations on where to place carbon monoxide detectors in Dallas:

  • Put them on each floor, especially where you have fuel-burning appliances, like furnaces, gas dryers, fireplaces, and water heaters.
  • You should always have one no more than 10 feet away from bedroom areas. If you only get one carbon monoxide detector, this is where to put it.
  • Place them about 10 to 20 feet from potential CO producing appliances.
  • Do not install them right beside or above fuel-utilizing appliances, as a non-threatening amount of carbon monoxide may be emitted when they start and prompt a false alarm.
  • Fasten them to walls at least five feet off the floor so they may measure air where people are breathing it.
  • Avoid installing them beside windows or doors and in dead-air zones.
  • Put one in spaces above garages.

Check your CO detectors regularly and maintain them according to manufacturer instructions. You will usually have to replace them within five or six years. You should also make sure any fuel-consuming appliances are in in proper working condition and sufficiently vented.